To fulfil any installation and application requirement

ALTHERMO liquid coolers have been designed and built in a modular system to fulfil any installation and application requirement. The frame components are made of galvanised steel, powder coated with a coverage of 80 microns, guaranteeing C4 corrosion resistance. All the fastening elements are in AISI 304 grade stainless steel.

The coils are built with the most suitable shape, tube diameter and fin pitch for the specific configurations, so that each device can achieve maximum power per unit volume and occupied surface.

The capacities are calculated with the latest and most sophisticated calculation methods and are validated on real units with a Ambient Air Temperature (AT) of 25 °C, Fluid Input Temperature (FIT) of 40 °C and a Fluid Output Temperature (FOT) of 35 °C. Fluid: Water.

The standard fans used are brushless EC to ensure compliance with the current and future ERP2020 regulation, as well as optimal performance levels, efficiency and low noise emissions.

Three-phase and single-phase AC fans can also be fitted on request.

In addition to the ranges in the catalogue, non-standard size equipment can also be supplied, such as dry coolers operating at extreme operating temperatures (ambient temperature up to 40 °C and fluid input temperatures up to 90 °C).

ISO 9001 quality standard
Directives applied:
2014/68/CE Pressure Equipment Directive: PED
UNI EN 60204/1 Electrical equipment for machinery
2006/42/CE Machinery Directive: MD.
2011/65/EU Directive on the restriction of the use of hazardous substances in electrical and electronic equipment: RoHS